- License Frame[2]
- Other Lights & Lighting Products[10]
- Auto Lighting System[10]
- Other Auto Parts[10]
- Ballasts[7]
- Inverters & Converters[3]
- Xenon Lamps[5]
- Other Exterior Accessories[2]
- Energy Saving & Fluorescent[4]
- License Plate[1]
- Car Fenders[2]
- Other Interior Accessories[6]
- Exhaust System[2]
- Other Universal Parts[1]
- Auto Ignition System[1]
- Wire Assembly[1]
- Other Auto Drivetrain[3]
- Brake System[2]
- Engine Hoods[2]
- Other Auto Electronics[1]
- Lamp Covers & Shades[2]
- Pliers[1]
- Laser Equipment[1]
- Headlamps[5]
- Auto Relays[1]
- Wiring Harness[1]
- Motorcycles[1]
- Contact Person : Ms. xie yuki
- Company Name : AES Car Parts Co., Ltd.
- Tel : 86-020-36139716
- Fax : 86-020-36139716
- Address : Guangdong,guangzhou,guangzhou
- Country/Region : China
- Zip : 510000
AES LED auto door welcome light, LED car logo laser light
AES LED auto door welcome light, LED car logo laser light
1)Technology Data Sheet
Power: | 3 watt/pc | led(s): | 2 pcs |
total power/set or pair: | 6 watt | Quality Warranty: | 1 year on normal using |
Ingress Protection: | IP65 | Function: | seeing your lovely car logo once you open your doors |
Voltage: | 12-24V | Lumen: | 360/set |
Lifespan: | 50000 hours | Light source color: | as your lovely car's logo colors |
Viewing Angle: | 120-270 | Working temperature | -40°C to 105°C |
Shockproof & Waterproof | Yes | Shell Material | Aluminum back cover |
Vehicle Applied: | Universal | Product Size | D28*L84 MM |
2)What is Mini laser lighted car logo?
The car logo laser light is specially designed for auto modification fancier; it's surposed to bring more driving fun to drivers;
The dazzle logo light will display on the ground when you open the car door ,and will turn off when you close the door;
It can be installed in both left and right door.Courtesy door light make your car artistic moreover the atmosphere.
Embedded type design will not destroy the original car appearance.
3)Tips for Installation
This product should be installed at the bottom of the door flame and make sure the Len vertical with the ground ;
1.Pull down the inside door board first. Mark the suitable location for drilling a hole.
2.Drill the hole on the door board with our borer .
3.Inset the product from the bottom of car door ,then arrange the power cord.
4.Install the nut through the power cord upon the hole inside; Tighten the nut;
5.Connect the power cord according to the installation guide;
6.Adjust the lamp projection to the suitable place with wrench tool.
7.Reinstall the inside door board,then check thefinal effect.
4)Applicable models:
BMW,Honda, Mazda, Toyota, Lexus,Nissan, Kia, Hyundai, Volkswagen,Buick, Ford, Jeep, Porsche, Lamborghini,Ferrari, unlimited,HKS, ABT, IIIM, Harman,AMG, JP, GARSON, FOX, King Kong and so on. About 100models
AES LED auto door welcome light, LED car logo laser light
